T10

*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

Shortcut for Last Dialed call menu

If you for some reason don’t want to enter the ‘Last Dialed calls menu’ by using the ‘YES’ key you can use the following key stroke instead: First ’0′ then ‘#’.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say “Wrong Pin” press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!

A way to (un)lock your cell phone on to the network(subset):
1. Press <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network
Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T18

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
To access SIM-Locking menu of your phone, press: < * [CLR] <
Be carefull or you may lock your phone.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T28

*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Message Report

When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

388

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you… or is it ? in case please let me know!)

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu...

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Access menu without Sim card ...

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

GA628

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...

Gh688

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Full Operator List

You can view the full operator list by doing the following: Go to the 'Edit list' menu under 'networks'. The phone say 'please wait' (searching for other networks). When finished, Press the < key once, then YES twice. Now the phone displays the full list. Browse through the list with the < > keys.

Monitor mod on Ericsson GH688

How to enable net monitor on Ericson 688..
1. Remove SIM from phone
2. Dial 112, press YES, hear something
3. Dial 112YESNO 4. Press <(left arrow) before SETTINGS
5. Then YES, <(left arrow), then you will see NM on?
6. press YES

GF788

*#06# for checking the IMEI (International Mobile Equipment Identity)
If you dial 923885 and > .It’ll appear a great menu, to change several options like menu’s string( welcome, roaming, normal), to change band codes and other things.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

SH888

*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>>> IR version info. if pressing yes you can check the phones IR device’s driver version.
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

OTHERS
Ericsson DH368

Try these Codes on your DH-368 phone:
1. Power on.
2. Press 904059 + 'MENU'
3. 'TEST SET' display ...
4. Press 'YES' will display @ then press 1 'RCL' will turn light off and you will see 'DONE'
5. Press 'YES' will display @ then press 86 'RCL' display 'DONE' also you will hear static... You can just enter the channel number (up to 1023) by pressing 'Yes' 3 'CLR' XXXX - channel number to enter a channel directly. You can also see the signal level on channel by pressing 3 'MENU'. You can see the ESN number by pressing 'YES' 1 'RCL' 96 in HEX format.
6. Press 3 to exit, now you phone will power down and power up again. You can install the phone number into the phone by pressing 923885 + 'MENU'

Ericsson GF768

Edit Greetings Tip
1. Go to the Keylock menu.
2. Set lock to Auto.
3. Press YES then hold the left arrow untill the Greetings menu appears.
GF788 menu in your GF768 phone! (1)
1. Go to the EDIT MENU and press YES.
2. Type the number "2" and press YES.
3. In "NAME" HOLD DOWN the "2" key untill the number "2" apperars. Press YES.
4. Press YES again (to save any position) then QUICKLY press and hold left arrow (<) untill "SIZE" appears in the display.
5.Press YES and choose "Full size". You now have the GF788 menu!
NB. Confirmed working on version 970716 and 980318.

GF788 menu in your GF768 phone! (2)

1.Go to MissedCall
2. Empty the list
3. Press the -> key for a second or two
4. The option Menu size turns up
5. Choose ‘yes’ and go from there
NB. Confirmed working on version 990122.

GF788 menu in your GF768 phone! (3)

1. Go and set the ring volume and press yes.
2. When ‘STORED’ is displayed – keep the right button -> pressed until ‘Extended Menu’ is displayed.
3. Select “Activate” the menus and you now have lots of extra features
NB. Confirmed working on version 980910

Ericsson A1018s

(UN)LOCKING YOUR ERICSSON A1018s TO SPECIFIC NETWORK :
A way to (un)lock your cell phone on to the network:
1. Press : <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset?
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work ‘only’ with the network

these codes will work on most Nokia Mobile Phones to activate/deactivate advanced hidden functions that you can’t change through the phone menu

==================================
Nokia Secret Codes
==================================

On the main screen type in:

*#06# for checking the IMEI (International Mobile Equipment Identity).

*#7780# reset to factory settings.

*#67705646# This will clear the LCD display(operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allowed status.

#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# – Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.

*#3370* – (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.

*#4720# – Half Rate Codec activation.

*#4720* – Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#

Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.

Default security code is 12345

Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold “0″ on the main screen to open wap browser.

Code Function
*3370# Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
12345 This is the default security code

*#21# Allows you to check the number that “All Calls” are diverted to
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)

*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
*#94870345123456789# Deactivate the PWM-Mem
press and hold # Lets you switch between lines

*#7760# Manufacturers code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again

**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered

Nokia Secret Codes
The complete guide

Here’s a list of known codes on Nokia mobile phones. This list does not include codes that make request to the network. To use these codes, just dial them like normal numbers.

Code Description
*#06# Display the IMEI (GSM standard)

*#0000# Display the firmware version and date (with variant info on S40 second edition or newer)

*#9990# Says “Bluetooth Test Mode” on Symbian models; accepts without any messages and Bluetooth behaves abnormally on non-Symbian ones (models with build-in Bluetooth radio, activate first to use)

*#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)

*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)

*#opr0logo# Clear the operator logo (3310 and 3330 only)

*#pca0# Activate the GPRS PCCCH support (early GPRS models)

*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)

*#res0wallet# Reset the mobile wallet (models with mobile wallet)

*#res0# Soft-format the memory (Symbian models only)

*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)

*#sim0clock# Display the SIM clock status (DCT3 only)

*#ssn0# Display the manufacturing serial number (mid-range and premium DCT3, basically all DCT4 and BB5 non-Symbian models)

*#war0anty# Display the manufacturing and repair info (no exit on DCT3) or total talk time on

Symbian models

*efr0# Enable EFR encoding (pre-2003 models)

#efr0# Disable EFR encoding (pre-2003 models)

*hra0# Enable HR encoding (pre-2003 models)

#hra0# Disable HR encoding (pre-2003 models)

#pw+1234567890+n# Display the SIM lock status: (pre-2003 models)

n = 1: provider lock
n = 2: network lock
n = 3: country lock
n = 4: SIM lock
n# n = 1..999: recall the number stored in the SIM location n (DCT3, DCT4, BB5 models)

These codes will work on most Nokia Mobile Phones to activate/deactivate advanced hidden functions that you can’t change through the phone menu

One useful function that all Nokia’s I’ve owned have is “Cell Info Display” which can usually be found in the phones “Display settings” (eg: in a Nokia 1600) or “Phone Settings” (eg: in a Nokia 3315)

If your network supports it, when “Cell Info Display” is enabled, it will display the name of the base station your mobile is currently connected to on the screen. eg: when i’m walking around the city it says “Sydney CBD” and when i’m at home it displays the name of my suburb.

Note:

To display “p” press “*” three times within one second, To display “w” press “*” four times within one second, To display “+” press twice “*” within less than a second

Code Function

*3370# / #3370# Activate / Deactivate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%

*#4720# / *#4720# Activate / Deactivate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time

*#7220# / *#7230# Enable / Disable PCCCPH support (faster GPRS)

#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

12345 This is the default security code

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

*#9999# Phones software version if *#0000# does not work

*#06# For checking the International Mobile Equipment Identity (IMEI Number)

*#67705646# Removes operator logo on 3310 & 3330

*#73# Reset phone timers and game scores

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
press and hold # Lets you switch between lines

*#7760# Manufacturers code

*#7780# Restore factory settings

*#8110# Software version for the nokia 8110

*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again..

“The following works of art and literature are among the most remarkable contributions of the Tamil creative genius to the world’s cultural treasure and should be familiar to the whole world and admired and beloved by all in the same way as the poems of Homer, the dramas of Shakespeare, the pictures of Rembrandt, the cathedrals of France and the sculptures of Greece….. the Thirukural, one of the great books of the world, one of those singular emanations of the human heart and spirit which preach positive love and forgiveness and peace…..”

Verse 781 What is as difficult to secure as friendship? And what greater security is there against foes?

Verse 782 Among wise men, freindship waxes like the crescent moon; Among fools it wanes as surely as the full moon must.

Verse 783 The bonds that good men share, like good bound books, Reveal new enjoyments at each new encounter.

Verse 784 The object of friendship is not merrymaking But a stern rebuking when friends go astray.

Verse 785 It is not constant meeting and companionship But mutual sensibilities that confer the alliance of friendship.

Verse 786 Friendship is not seen on a friendly face, But felt deep within a friendly heart.

Verse 787 To divert a man from wrong, direct him toward the right And share his sorrow in misfortune is friendship.

Verse 788 As swiftly as the hand moves to seize a slipping garment, Friendship acts to assuage a friend’s distress.

Verse 789 Where does Friendship hold her court? It is where friends May find constant support in every possible circumstance.

Verse 790 To boast, “He means so much to me and I to him,” Merely belittles a friendship.

The Bible, the primary text of the western civilization, reflects upon friendship as the bond that forms the foundation to human faith, trust and companionship. Following verses from the bible aptly portray the importance of friends:

“Ask and it will be given to you; seek and you will find; knock and the door will be opened to you.” Matthew 7:7

“Greater love hath no man than this that a man lay down his life for his friends.” John 15:13-15

Besides, there are several tales from the Old Testament and the New Testament about the value of friendship and how true friendship is a treasure to unearth. A noticeable point is that, both the versions make a difference between the two broad meanings of friendship- one is a mere acquaintance, the other is a more affectionate relation.

In the Old Testament, Abraham is called the “friend of God” because of the intimacy of his relations. God speaks to Moses face to face “as a man…unto his friend” (Ex 33:11). The romantic friendship of Ruth and Naomi, the devotion of the subordinate Hushai for David, or the mutual relation between David and Jonathan – the Old Testament is replete with these interesting tales of friends and friendship.

In the New Testament, the relationship between Jesus and his disciples clearly depicts how human friendship can constantly grow. From being teacher and disciple, to lord and servant their relationship finally grew to an unparalleled friendship.

Considering the valuable role friends play in our life it was deemed to fit to have a day dedicated to friends and friendship. The United States Congress, in 1935, proclaimed first Sunday of August as the National Friendship Day. Since then, celebration of National Friendship Day became an annual event. The noble idea of honoring the beautiful relationship of friendship caught on with the people and soon Friendship Day became a hugely popular festival.

Following the popularity and success of Friendship Day in US, several other countries adopted the tradition of dedicating a day to friends. Today, Friendship Day is enthusiastically celebrated by several countries across the world including India.

In 1997, the United Nations named Winnie – the Pooh as the world’s Ambassador of Friendship

There is not much literature on Friendship Day history as we celebrate today. However, there are numerous folktales and several instance in mythological legends that shows that friends and friendship have been valued since the beginning of civilized world. As an intrinsically social creature, men love to make friends to further this process of socialization.

International Friendship Day celebrations take place on the first Sunday of August every year. The tradition of dedicating a day in honor of friends began in US in 1935(no references). Gradually the festival gained popularity and today Friendship Day is celebrated in large number of countries including India. On this day people spend time with their friends and express love for them. Exchange of Friendship Day Gifts like flowers, cards and wrist bands is a popular tradition of this occasion.

As negative emotions come, you need to comfort your loving partner. As anxiety leaves, it will create enough space that can be filled by tenderness and respect. One of the greatest gifts you can offer to your spouse is to let him or her discover their choice to be happy. Understanding their own problems is their first step of getting objectivity. It is a difficult path, but they can the results. To be happy is an individual process. Many times, you don’t actually know what makes you happy. Ask your loving partner what things he or she sees that make you happy. Then, you only need a mirror to reflect your happiness.

You Know you are having a bad day when…

Your birthday cake collapses from the weight of the candles.

You call the suicide prevention hotline and they put you on hold.

Everyone avoids you the morning after the company office party.

The bird singing outside your window is a vulture.

You wake up and your braces are stuck together.

Your blind date turns out to be your ex-wife/husband.

You have to borrow from your Visa card to pay your MasterCard.

Nothing you own is actually paid for.

The Gypsy fortune teller offers to refund your money when she sees your future.

People think that you’re 40 and you’re only 25.

The doctor says you are in fine health for someone twice your age.

TRY TO HAVE A GOOD DAY!

A says – Woman is attractive Flower

B says – Woman is Beautiful Gift

C says – Woman is great source of Comfort

D says – Woman has a sweet Dialect

E says – Eastern or Western, woman is the Worthy

F says – Woman is central Figure of Family

G says – Woman always glitters with the rays of her Partner

H says – Woman has Holy Spirits

I says – Woman has basic institution in her Lap

J says – Woman is a Full of Joy

K says – Woman is Head of Kisses

L says – Woman is Lovely Thing

M says – Woman is symbol of Modesty

N says – Nails increase the Beauty of Woman

O says – Woman is an Pretty Ornament

P says – Woman is Princess

Q says – Woman is Queen

R says – Woman is Rare Gift

S says – Woman is a main source of survival the Human Being

T says – Woman has true Spirits of Love

U says – Woman is an Peaceful Umbrella

V says – Woman is valley of Love

W says – Woman is Wafer

X says – Woman has Sweet Kisses

Y says – Woman is your Jewelery

Z says – Woman has a great Zeal..

Next Page »

Google